Downloads

The actual project files I work from, free. Open them in Logic, save as a template, and start the next song with the routing already done.

Logic Pro template · Logic Pro 11.2 or later

Full Band Routing Template

My standard setup. Every song on the album starts from this project.

Thirty-seven tracks of summing stacks, aux buses, and a full-mix bus, wired so you can solo any instrument group with one option-click and A/B against reference tracks without a third-party plugin. Stock Logic plugins only.

What's inside

  • Acoustic (mic + pickup), verse, chorus, and accent guitar stacks, each guitar as a DI and a wet track, all into an All Guitars bus
  • Bass (DI + wet) and drums into a Rhythm Section bus
  • Extra Instruments folder stack for banjo, synth pad, and anything else
  • Lead vocal (verse, chorus, bridge), lead harmonies, and backing vocal stacks into an All Vox bus
  • Music bus and All Vox feed a Full Mix bus; three reference tracks go straight to the stereo out
  • Inputs pre-mapped for a four-input interface: 1 and 2 modeller dry/wet, 3 microphone, 4 guitar DI
Version 1.0 · 369 KB · Updated November 3, 2025

Built for: Apple Logic Pro, Headrush Core 5.0, Slate Digital ML-1, Fender Highway Series, Ibanez SR400 EQM

How it worksDownload

Logic Pro template · Logic Pro 11.2 or later

Singer-Songwriter Template

Acoustic guitar and a vocal. The same routing idea, cut down to what you need.

A lighter version of the full band template for one guitar and one voice: acoustic mic and pickup, lead vocal, harmonies, a scratch track, and a reference track, with stock plugin starting points already on each channel.

What's inside

  • Acoustic guitar stack (mic + pickup) with Channel EQ and Compressor starting points
  • Lead vocal and harmony stacks into an All Vox bus with DeEsser and compression ready to go
  • Shared vocal plate and slap delay aux sends
  • Music and Full Mix buses plus one reference track for A/B listening
  • Inputs pre-mapped: 1 microphone, 2 guitar pickup
Not uploaded yet. It will appear here as soon as the file is ready.

Built for: Apple Logic Pro, Slate Digital ML-1, Fender Highway Series

How it worksComing soon

How to install a Logic template

  1. Unzip the download and open the .logicx file in Logic Pro.
  2. Choose File → Save as Template, give it a name, and it shows up under My Templates every time you start a new project.
  3. Open the mixer and set the inputs to match your interface. Everything else is already routed.

Free for your own songs. Please don't re-upload or sell the files.